Sběrače frakcí pro LC

Injektory, sběrače, ventily, mixery - Sběrače frakcí pro LC

FRACTION COLLECTOR FC 100

Collector FC 100FC 100S is a fraction collector for PLC, X-Y type. It is equipped with a table on which is five rows of tubes, each having 20 tubes. In the upper part of the collector is a X - Y movement systém with two step motors which change a position of nozzle introducing a liquid. Liquid is giong through a solenoid valve which is closed during nozzle movement. There is a glass reservoir in imput tubing on a T piece just before a valve. It is filled with air and is used In order not to increase the detector pressure. Reservoir is filled during nozzle movement and air pressure increases. When opening valve, liquid is pressurized out in short time.

On the upper right side of own collector is a panel with two lines illuminated display and keyboard. There is a possibility to programme each fraction time separatelly.

FC 100 is the same instrument builded into a stainless steel frame, having glass funnels with plastic tubing instead of glass tubes. There is a 1 l vessel on the end of each tubing. Vessels are stored in two floors in plastic racs.

FRACTION COLLECTOR FC 40

FC 40S is a simple fraction collector for PLC, caroussel type. It is equipped with a rotating table on which is 42 tubes fixed. In the upper part of the collector is a rotation nozzle introducing a liquid. Tubes are so near that no stop flow system is necessary.

Two lines illuminated display and keyboard are in separate box with electronics. There is a possibility to programme each fraction time separatelly.

FC 40 is the same instrument builded into a stainless steel stand, having a plate with funnels and plastic tubing instead of glass tubes. There are different volume vessels on the end of each tubing. Vessels are staing on the floor.